Skip to content
B Benno's Refinishing

Residential Refinishing

Most of our work happens in homes people are living in — floors under daily traffic, a kitchen that gets used three times a day, a staircase the kids run down, a deck that faces the lake weather. Here is what we do in a home, and what it is like to have the work done while you live there.

Residential hardwood floors refinished by Benno's Refinishing

What we refinish in a home

Hardwood floors. The heart of most home jobs. A full sand and refinish brings a worn floor back to bare wood and rebuilds the finish; a buff and coat refreshes a floor whose finish is dull but still intact. See the hardwood floor refinishing page for the full process and the finish choices. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

Kitchen cabinets. Cabinets take more daily wear than almost anything else in the house — grease, steam, hands, cleaning products. Refinishing renews the finish without replacing the boxes. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. See Kitchen Cabinet Refinishing.

Furniture and antiques. Dining tables, dressers, bed frames, and the pieces that have been in the family for years. Small simple pieces are quicker work; larger items take longer, and antiques take longer still, because they need special care. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. See Furniture Refinishing and Antique Furniture Refinishing.

Staircases, banisters, and handrails. Hand-detail work, usually done to match newly refinished floors. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. See Staircase, Banister & Handrail Refinishing.

Doors. Entry doors that have taken sun, rain, and lake air, and interior doors that have gone dull with use. Many doors can be refinished without being removed. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. See Door Refinishing.

Decks. Deck work is weather-driven — it needs a stretch of dry weather, and rain after sanding means more drying before the next step. The quietest version of the job is the one scheduled for a dry spell, not squeezed between storms. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

Smaller repairs and touch-ups — a water ring, a scratch through the finish, a worn patch — are part of the same work. See Wood Repair & Finish Touch-Ups and Dining Table & Bar Top Refinishing.

What to expect while the work is going on

Dust. Sanding is dusty work. Dust containment — sanders hooked to filtered vacuums — captures most of it at the source, and plastic at the doorways keeps the rest out of the rooms we are not working in. It does not mean zero dust, and a final cleaning by the homeowner is still part of the job. If anyone in the house has asthma or breathing trouble, say so at the estimate.

Odor. This depends on the finish. An oil-based finish smells strong while it dries, and most households plan to be out of the house while the fumes are at their worst. A water-based finish has low odor, and most households stay home while the work goes on — as long as the bedrooms and a bathroom sit outside the work zone.

Rooms off-limits. The rooms being finished cannot be used while coats are drying — no shoes, no bare feet, socks only once the finish allows it. Furniture and rugs go back once the finish has hardened enough — Kate will talk through the sequence for your job. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

Staying in the home. It is realistic for most water-based jobs, and many clients have the work done before a move-in so the rooms are empty and the finish dries undisturbed. With an oil-based finish, plan on being elsewhere while the fumes are strongest. Either way, the floor needs gentle treatment until the finish has fully hardened. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

Noise and vibration. Sanding is loud and it shakes the room — pictures come off the walls for a reason. Pets and kids need to be out of the work area while sanding and finishing are going on. Keep dogs off a newly finished floor until the finish has fully hardened, if you can.

Prep checklist

  • Move furniture, rugs, and anything on the floor out of the rooms being done. Plan where it goes — a garage or a room that is not being worked on.
  • Empty closet floors and take pictures, mirrors, and anything hanging on shared walls down.
  • Clear small and fragile items, electronics, and valuables yourself. We handle the heavy furniture as part of the job, and we will say so plainly at the estimate if something — a piano, a safe, an antique — needs a professional mover.
  • Clear a path from the driveway to the work area, and make sure we have power and water access.
  • Keep the heat on at its normal setting. A stable temperature and humidity help the finish dry and cure the way it should.
  • For cabinets, clear everything out of the cabinets and drawers before we arrive. For decks, move planters, grills, and furniture off the deck and give us a dry stretch to work in.
  • An adult should be there for the estimate and on the first day, to walk the rooms with the crew and confirm colors and transitions.

Aftercare

Once the finish has cured, keeping it looking good is mostly a matter of not working against it. Sweep or dust regularly — grit underfoot is what wears a finish down. Clean floors with a pH-neutral hardwood cleaner and a barely damp mop. Skip the steam mop, the vinegar and water, wax, and acrylic shine products; they dull the finish, leave residue, or can keep a future recoat from bonding. Felt pads under every furniture leg, and lift heavy pieces instead of sliding them. Clean up spills right away — polyurethane makes wood water-resistant, not waterproof. Use rugs and mats in the high-traffic spots, and rotate them now and then so the sun does not leave pale patches where they sat.

Plan on a buff and coat on a regular cycle, and a full refinish when the finish has worn through, depending on traffic. Done on schedule, a wood floor stays out of the replacement cycle for a very long time. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

How to start

Call and tell us about the wood — what it is, where it is, and what is wrong with it. We will come and look, talk through whether the job is a refinish, a recoat, or a touch-up, and give you a straight answer. Every estimate starts with a conversation, not a form. If the work is for a business rather than a home, see Commercial Refinishing.

Call for an estimate

Talk to Kate about your home — floors, cabinets, furniture, stairs, doors, or the deck — and we will come and take a look.