Skip to content
B Benno's Refinishing

Commercial Refinishing

In a business, wood is working all day — floors under a hundred pairs of feet, a bar top under glasses and cleaning chemicals, tables wiped down a dozen times a night. We refinish that wood so it holds up to the traffic, and we schedule the work around your trading hours so you do not have to close to get it done.

Commercial woodwork refinished by Benno's Refinishing

Who this is for

Restaurants, bars, hotels, offices, retail shops, lobbies, and event spaces — and the people who look after them: builders, realtors, interior designers, general contractors, and architects. We also take on institutional work: preservation and architectural woodwork for projects where the wood is part of the building, not just decoration. If the wood in your space is tired, scratched, or worn through in the traffic lanes, that is our work.

Hardwood floors for commercial spaces

A restaurant floor takes more foot traffic in a month than a family home takes in a decade, and every hour the floor is closed is an hour the business cannot use it. That makes commercial floor work as much a scheduling problem as a flooring one. We plan it that way from the start: a walkthrough with whoever manages the property, the scope agreed in writing, and finish systems chosen for durability and the look.

The usual rhythm is off-hours work — sanding and coating fitted around your trading hours, so the space is ready for service again when the work is done. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. Where a full close is not possible, we work in zones: one section at a time behind hard barriers, so the operation shifts rather than stops. Wear is rarely even across a commercial floor — the path from the kitchen door to the service station wears many times faster than the dining room perimeter — so the recoat plan follows the wear, not the calendar alone.

One distinction matters when planning: a floor can take foot traffic before the finish reaches full hardness. Rolling loads, heavy furniture, and aggressive cleaning need to wait until the finish has hardened — Kate will talk through the sequence for your job so nobody has to guess. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

Bar tops and dining tables for hospitality

A bar top takes more chemical abuse in a year than a conference table takes in a decade, and it is the surface guests look at longest. Dining tables are wiped down constantly and take spills, heat, and cleaning products every service. These pieces need a harder finish than a home piece does, and the finish choice is the decision that matters most.

For a working bar, a catalysed finish — the kind that cures hard and resists alcohol and citrus — is the usual default, and it is the reason a properly finished bar top is built to stand up to daily service. Oil and hardwax finishes look superb and can be repaired in place, which is a real advantage when a small spot needs attention without redoing the whole top. Back bars, shelving, rails, and the millwork around the bar are usually handled in the same visit.

Bar tops are almost always done during a closure rather than while the bar is in service, because the finish needs to harden before it takes glassware again. In practice that means scheduling against the quietest window, with the bar sealed off and ventilated. Dining tables are simpler: they are usually done in the quieter hours, and back in service when the finish allows it. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. The one case where refinishing is not the answer is where the wood underneath has swelled from sustained water at the service well, or veneer has come away — then replacement is the honest call.

Cabinets, millwork, and doors

Commercial woodwork goes beyond floors and tables. We refinish cabinets, millwork, panelling, and doors in offices, hotels, and institutional buildings — reception desks, corridor panelling, stair railings, built-ins, and the woodwork in lobbies and guest rooms. Most of this work happens on-site, scheduled around operating hours, and larger projects are phased section by section so part of the space stays open while the rest is being worked on.

For hotels, that usually means phased work over multiple visits so guests are not disrupted. For offices, it means evenings and weekends. For a builder or designer handing over a space, it means woodwork that looks finished on the day the client walks through — not a list of scuffs and dull patches still waiting to be fixed.

Off-hours and phased work, so you can stay open

Closing completely can disrupt the business more than the work itself — a restaurant loses an evening of service, a shop misses shopping days, a hotel cannot move its guests out for a corridor. So the work is divided into tasks that fit the windows you actually have: evenings, weekends, or other low-traffic hours. Each section is finished, protected, and left in a proper condition before the property becomes active again.

Not every finish can be put back into full service right away — hardwood finishes need to harden before they take full use, and we will not pretend otherwise. What we will do is agree the scope with you in writing before work starts, and build the phasing around the parts of your space that cannot go out of use: entrances, exits, restrooms, kitchens, service corridors, and reception areas. Timelines vary by project — call Kate at 312-493-6151 to discuss timing.

High-traffic durability and recoat cadence

A commercial wood floor that is screened and recoated on a planned cycle stays in service almost indefinitely. The same floor left until the finish wears through to bare wood needs a full sand, with far more downtime and expense. That is the whole logic of a recoat schedule.

A commercial floor benefits from a screen and recoat on a planned cycle — and high-traffic spaces need it more frequently than a home does. Recoat before the finish wears through and you avoid a full resand caused by neglect. Entry matting is the simplest floor protection there is: good walk-off matting at every entrance extends finish life dramatically, because most of the grit that wears a floor down walks in through the door.

For bar tops and tables, the cadence is set by the finish. A properly finished bar top is built to stand up to daily service; a tabletop in a busy dining room will need attention sooner. We will tell you plainly what to expect for your room and your traffic.

Working around occupied spaces

Commercial work happens while people are still in the building, so keeping the rest of the space clean and usable is part of the job. Dustless sanding — machines hooked to filtered vacuums — keeps merchandise, workstations, and electronics clean, and in most cases there is no need to shroud inventory or deep-clean afterward. Work areas are sealed off, guests and staff are routed around them, and the noisiest, dustiest stages are kept to the hours when the space is quietest.

For a hotel, that means corridors and lobbies done in sections with guests moving freely elsewhere. For a restaurant, it means the dining room is ready for service and the work is invisible by the time the doors open. For an office, it means the team comes in to a finished floor, not a work site.

How to start

Call and tell us about the space — what the wood is, how it is used, and when you can give us access. We will walk it with you, agree the scope in writing, and give you a straight answer on whether the work fits around your trading hours, a phased schedule, or a short closure. Timelines vary by project — call Kate at 312-493-6151 to discuss timing. Every job is quoted on its own merits, and every estimate starts with a conversation, not a form.

Related pages: Hardwood Floor Refinishing, Dining Table & Bar Top Refinishing, Kitchen Cabinet Refinishing, Door Refinishing, and Interior Architectural Woodwork. For homes, see Residential Refinishing, and for the floor process in detail, Hardwood Floor Refinishing.

Call for an estimate

Talk to Kate about your restaurant, bar, hotel, office, or institution — we will walk the space with you and plan the work around your hours.